| CONSTRUCTION:
FRAME fabricated of heavy-gauge, one-piece, roll-formed stainless steel, 3/4" x 3/4" angle with corners heliarc welded, ground and polished smooth to a satin finish. Double strength continuous integral stiffener on all sides for added strength. Bevel on front of angle secures frame flush against mirror.
BACK fabricated of galvanized steel, secured to frame with concealed screws, equipped with integral horizontal hanging brackets.
MIRROR of first quality l/4" float glass triple silver plated with electro-copper plated layer and thermosetting infrared cured paint backing with Poly-Glaze protective finish. Meets federal specification DD-M-0041 1b against silver spoilage and guaranteed for 15 years. All edges protected by shock-absorbing, neoprene tubing.
SHELF fabricated of l8-gauge stainless steel with exposed surfaces in architectural satin finish. Welded to frame.
SHELF BRACKETS fabricated of l6 gauge stainless steel are provided on units exceeding 48" width.
INSTALLATION:
Secure concealed mounting bracket to wall with screws (not included) at holes provided. Mounting kits available through Bradley (ref. #899-026). Refer to technical data sheet #8880. NOTE: Provide in-wall backing at mounting screw locations. Position mirror over mounting bracket to engage hanger tabs. Slide mirror down and lock into position.
OPTIONAL FEATURES:
|
Feature |
Suffix |
|
1/4" tempered glass mirror in lieu of
polished float glass mirror |
-2 |
|
Laminate glass |
-3 |
|
Highly polished No. 8 architectural finish,20-gauge stainless steel in lieu of polished float glass mirror |
-4 |
|
Bright annealed 20-gauge stainless steel in lieu of polished float glass mirror |
-5 |
|
Plexiglass |
-6 |
GUIDE SPECIFICATION:
Mirror shall be framed with heavy gauge, one-piece, roll-formed, 3/4" x 3/4" stainless steel angle with double-strength continuous integral stiffener. Welded corners shall be polished to a uniform satin finish. Integral 18 gauge stainless steel shelf shall have front and side flanges with welded and polished corners. Mirror shall be of first quality 1/4" float glass guaranteed for 15 years against silver spoilage and protected by a shock absorbing, neoprene tubing with Poly-Glaze protective finish. Back of unit shall be galvanized steel secured to frame with concealed screws, equipped with integral horizontal hanging brackets and separate wall hanger for concealed mounting. |
