| CONSTRUCTION:
� FRAME fabricated of heavy-gauge, one-piece, roll-formed stainless steel with bright annealed finish. Channel is 3/4" x 3/4" x 7/1 6" with 90° mitered corners. Double-strength continuous integral stiffener on all sides for added strength.
� BACK fabricated of galvanized steel.
� MIRROR of first quality 1/4" float glass triple silver plated with electro-copper plated layer and thermosetting infrared cured paint backing with Poly-Glaze protective finish. Meets federal specification DD-M-00411b against silver spoilage and guaranteed for 15 years. All edges protected by shock-absorbing, neoprene tubing.
� MOUNTING BRACKETS fabricated of 18 gauge cold rolled steel.
INSTALLATION:
Secure concealed mounting bracket to wall with screws (not included) at holes provided. Mounting kits available through Bradley (ref. #899-026). Refer to technical data sheet #8880. NOTE: Provide in-wall backing at mounting screw locations. Position mirror over mounting bracket to engage hanger tabs. Slide mirror down and lock into position.
OPTIONAL FEATURES:
|
Feature |
Suffix |
|
~ 1/4" tempered glass mirror in lieu of
polished float glass mirror |
-2 |
|
~ Laminate glass |
-3 |
|
~ Highly polished No. 8 architectural finish,20-gauge stainless steel in lieu of polished
float glass mirror |
-4 |
|
~ Bright annealed 20-gauge stainless steel in lieu of polished float glass mirror |
-5 |
|
~ Plexiglass |
-6 |
GUIDE SPECIFICATION:
Mirror shall be framed with one-piece, roll-formed stainless steel with 3/4" face and neatly mitered corners. Double-strength continuous integral stiffener on all sides. Back of unit shall be galvanized steel. Separate mounting brackets for concealed mounting. Mirror shall be of first quality 1/4" polished float glass, guaranteed for 15 years against silver spoilage and protected by shock absorbing, neoprene tubing with Poly-Glaze protective finish. |
