CONSTRUCTION:
� FRAME fabricated of heavy-gauge, one-piece roll-formed stainless steel, 3/4" x 3/4" angle with corners heliarc welded, ground and polished smooth to a satin finish. Double-strength continuous integral stiffener on all sides for added strength. Bevel on front of angle secures frame flush against mirror.
� BACK fabricated of galvanized steel, secured to frame with concealed screws, equipped with integral horizontal hanging brackets.
� MIRROR of first quality 1/4" float glass, triple silver plated with electro-copper plated layer and thermosetting infrared cured paint backing with Poly-Glaze protective finish. Meets federal specification DD-M-0041 1b against silver spoilage and guaranteed for 15 years. All edges protected by shock-absorbing, neoprene tubing.
� WALL HANGER fabricated of 18-gauge cold rolled steel, all welded construction to form rigid template.
INSTALLATION:
Secure concealed mounting bracket to wall with screws (not included) at holes provided. Mounting kits available through Bradley (ref. #899-026). Refer to technical data sheet #8880. NOTE: Provide in-wall backing at mounting screw locations. Position mirror over mounting bracket to engage hanger tabs. Slide mirror down and lock into position.
OPTIONAL FEATURES:
|
|
Suffix |
|
~ 1/4" tempered glass mirror in lieu of
polished float glass mirror |
-2 |
|
~ Laminate glass |
-3 |
|
~ Highly polished No. 8 architectural
finish, 20 gauge stainless steel in lieu
of polished float glass mirror |
-4 |
|
~ Bright annealed 20 gauge stainless
steel in lieu of polished float
glass mirror |
-5 |
|
~ Plexiglass |
-6 |
GUIDE SPECIFICATION:
Mirror shall be framed with heavy-gauge, one-piece roll-formed 3/4" x 3/4"stainless steel angle with double-strength continuous integral stiffener. Welded corners shall be polished to a uniform satin finish. Mirror shall be of first quality 1/4" float glass guaranteed for 15 years against silver spoilage and protected by a shock absorbing, neoprene tubing with Poly-Glaze protective finish. Back of unit shall be galvanized steel secure to frame with concealed screws, equipped with integral horizontal hanging brackets and separate wall hanger for concealed mounting.
Washroom Accessories Warranty
Bradley Corporation warrants to commercial and institutional purchasers only each new Bradley washroom accessory unit purchased from us to be free from defects in materials and workmanship under normal use and service upon the following terms and conditions:
This warranty is limited to replacing or repairing, at our option, transportation charges prepaid by the purchaser, any Bradley washroom accessory unit or part thereof which our inspection shall show to have been defective within the limitations of this warranty.
The period during which Bradley accessory units are warranted is as follows, measured from the date of our invoices:
- Complete unit, excepting mirrors - one (1) year.
- Stainless Steel Mirror Frames - fifteen (15) years against corrosion.
- Plate Glass Mirrors - fifteen (15) years against silver spoilage.
- Hand/Hair Dryers - ten (10) years (see Dryer Warranty).
- Tempered Glass Mirrors - five (5) years against silver spoilage.
- Laminate Glass - five (5) years against silver spoilage.
- Polished #8 Architectural Grade Finish on 304 Series Stainless Steel - one (1) year against corrosion.
- Bright Annealed Finish on 430 Series Stainless Steel - one (1) year against corrosion.
This warranty does not cover installation labor charges and does not apply to any units which have been damaged by accident, abuse, improper installation, improper maintenance, or altered in any way.
The replacement or repair of defective Bradley washroom accessory units as stated in this warranty shall constitute the sole remedy of the purchaser and the sole liability of Bradley Corporation under this warranty. BRADLEY CORPORATION SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES CAUSED BY DEFECTS IN BRADLEY WASHROOM ACCESSORY UNITS OR ANY DELAY IN THE REPAIR OR REPLACEMENT THEREOF.
This warranty extends only to commercial and institutional purchasers and does not extend to any others, including consumer customers of commercial and institutional purchasers.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE.
Revised: March 12, 2004
